Source 42CrMo stump grinder cutter bolts with brazed YG8/YG11 carbide tips for wear resistance, compatible equipment, custom sizes and bulk B2B orders...
Carbide-tipped stump grinder teeth bolts are replacement cutting components for manufacturers, distributors, repair shops and landscaping contractors that need dependable fit confirmation and repeatable bulk supply. This product combines a 42CrMo alloy steel body with a brazed tungsten carbide cutting tip. The steel body is quenched and tempered to a reference hardness range of HRC 42-55 for impact resistance and reduced risk of a broken shank. The carbide tip is available in YG8 or YG11 grade, with a reference hardness of HRA 89-90, to support wear resistance during stump grinding work involving soil, small stones and other abrasive contact.
The product is made in China as a Greenteeth replacement part. It is designed for compatibility with Greenteeth 500, 700, 900 and 1100 series configurations, subject to confirmation of the equipment model, tooth series, dimensions and mounting details. It may also be used as a compatible replacement part for common Vermeer, Rayco and Bandit stump grinder applications and other compatible equipment. It is not represented as an original, authorized or branded Greenteeth component.
42CrMo alloy steel tooth body: The quenched-and-tempered steel shank is intended to handle impact loads during stump cutting while helping reduce premature shank breakage.
YG8/YG11 tungsten carbide tip: The brazed carbide head provides a wear-resistant cutting surface for professional landscaping machinery. In abrasive soil and stone contact, it is designed not to become blunt as quickly as an ordinary steel cutting head, although service life depends on operating conditions, setup and maintenance.
Brazed tip attachment: The carbide head is brazed to the steel body to form a replacement tooth bolt assembly. Customers should confirm the required structure and dimensions before ordering.
Reversible two-sided tooth design: Compatible configurations can be turned over and used on the second cutting side. One set can therefore provide two usable orientations, helping extend replacement intervals when the tooth body and mounting condition remain suitable.
Serviceable carbide head: When sharpening is required, use a diamond grinding wheel or diamond abrasive. A conventional grinding wheel is not suitable for effectively grinding the tungsten carbide tip.
The tooth body uses 42CrMo alloy steel with quenching and tempering treatment. The stated reference hardness range is HRC 42-55, selected to balance impact resistance and shank durability without presenting an unverified fixed test result for every batch. The cutting head uses YG8 or YG11 tungsten carbide with a reference hardness of HRA 89-90. The carbide head is brazed in place. Actual material selection, dimensions, brazing details and finishing requirements should be confirmed against the buyer's drawing, sample or equipment application before production.
For repeat orders, buyers can provide a product drawing, existing tooth sample, equipment model, tooth series, mounting dimensions and expected working conditions. These details allow the supply team to review the required fit rather than relying only on a general machine brand or product photo.
These replacement tooth bolts are intended for stump grinding and stump removal operations on professional landscaping machinery. Typical application references include compatible Greenteeth 500, 700, 900 and 1100 series configurations, plus compatible Vermeer, Rayco and Bandit machines. Because different machine generations and cutting-wheel assemblies can use different mounting dimensions, brand names alone do not confirm fitment. Before purchasing, send the equipment model, tooth series, existing part information and key dimensions for compatibility review.
They are suitable for B2B sourcing programs involving stump grinder manufacturers, replacement-part distributors, landscaping equipment dealers, repair workshops and engineering or land-clearing contractors. The product can be supplied for regular replenishment, service inventories, machine assembly programs and project-based maintenance requirements.
The combination of a heat-treated 42CrMo body and a brazed YG8/YG11 carbide tip addresses two different wear conditions in stump grinding: impact on the steel shank and abrasion at the cutting head. The reversible design can allow a suitable tooth to be flipped to its second side before replacement, provided the carbide tip, shank and mounting condition pass inspection. This approach can help buyers manage spare-part consumption, but actual service life depends on wood type, soil, stones, cutting pressure, machine setup, operator practice and maintenance.
Inspect the tooth before deciding whether to flip, sharpen or replace it. Slower cutting, higher fuel consumption, noticeable machine vibration, an uneven cutting surface or inconsistent chip size can indicate that the tooth requires service. The carbide head should be inspected for excessive rounding, edge chipping or separation from the steel body. The steel shank should be checked for bending or fracture. A damaged or deformed tooth should not be returned to service solely because the carbide edge remains visible.
Product type: Carbide-tipped stump grinder teeth bolt / cutter tooth replacement part
Tooth body material: 42CrMo alloy steel
Tooth body treatment: Quenched and tempered
Tooth body hardness: Reference range HRC 42-55
Carbide tip options: YG8 or YG11 tungsten carbide
Carbide attachment: Brazed fixation
Carbide hardness: Reference range HRA 89-90
Design option: Reversible two-sided tooth for compatible configurations
Compatibility reference: Greenteeth 500/700/900/1100 series and other compatible equipment
Manufacture origin: China
Dimensions, thread, weight and packing: Confirm according to the equipment model, tooth series, drawing or sample
Specific dimensions, thread specification, overall weight, package quantity and packaging method are not stated here because they vary by application. Ask the customer to provide the machine model, tooth series, existing part number, mounting dimensions and a clear photo or sample for fit confirmation.
Custom service is available for buyers who need a particular tooth profile, mounting configuration, material option, carbide grade, brazing requirement, surface treatment, package format or labeling arrangement. Final customization depends on the drawing, sample, order quantity and production review. For wholesale and recurring supply, buyers can request quotation support based on the required model range, forecast quantity, delivery schedule and inspection requirements.
For a fit review and quotation, send the stump grinder brand and model, Greenteeth series or tooth configuration, tooth dimensions, thread or mounting details, required carbide grade, estimated order quantity and destination market. If available, include an existing tooth sample, technical drawing or photos showing the mounting face and cutting head. This information helps reduce mismatched orders and supports more controlled replacement-part purchasing.
Contact us for carbide-tipped stump grinder teeth bolts for machine production, distribution, repair inventory and field-service projects. Share your equipment model, tooth series and dimensions first. We will review the application, confirm the available configuration, discuss customization and prepare a quotation for sample orders or bulk B2B supply. The priority is not simply to reduce consumption; it is to maintain the required cutting result through correct fitment, suitable material selection and timely inspection.
Copyright © 2025-2026 https://www.agrimaxagriculture.com All Rights Reserved Cangzhou Agrimax Agricultural Machinery Parts Co., Ltd.
