Buy 45# steel agricultural pins with attached double-wire retaining clips for compatible tractors and implements, with stock supply and bulk fitment support....
Product Overview
This round head agricultural pin is a 45# steel connecting and retaining component for compatible tractor, implement and equipment assemblies. The visible product has a cylindrical pin body, a broad round head at one end and an attached double-wire retaining clip that runs alongside the body. The head provides a clear stop at the outside of the connection, while the wire clip is designed to remain with the pin and help retain it after insertion through a compatible hole.
The attached wire arrangement gives this product a different installation concept from a plain pin, a loose cotter pin or a large circular pull ring. Exact dimensions, clip geometry, working length, hole fit and load rating cannot be confirmed from the image and should be checked against the original part, drawing, sample or equipment information.
Key Features and Benefits
Round head: The visible circular head provides a defined end stop when the pin is inserted in the correct direction and seated against the mating component.
Cylindrical pin body: The main shaft is intended for a compatible round-hole connection, subject to diameter, working-length and alignment confirmation.
Attached double-wire retainer: Two visible wire sections run from the head area along the pin body and form the anti-loss retaining arrangement. The exact locking action depends on the mating connection and should be confirmed before use.
45# steel: 45# steel is the confirmed material. It is a commonly used carbon steel option for mechanical connection parts; wear, deformation and load suitability depend on the joint and operating conditions.
Compact service format: The attached retainer keeps the pin and retaining element together during handling, which can be useful for repair, maintenance and equipment service stock.
Applications
This retaining pin can be reviewed for compatible agricultural machinery such as tractors, plows, cultivators, seeders, planters, harrows, balers, mowers, trailers, loaders and other implements. Typical service uses may include securing removable attachments, retaining a bracket or linkage connection, joining a pivoting component and replacing a damaged or missing retaining pin.
The pin may also be considered for compatible landscaping, construction or material-handling equipment when the round head, shaft and double-wire retainer match the connection design. The product image does not establish a particular brand, model or universal equipment fit. Buyers should confirm the actual pin position, hole arrangement, insertion direction, clearance and retaining contact before ordering.
For manufacturers and parts distributors, this design can be evaluated for replacement-part lists and service inventories. Repair shops and engineering contractors can review it for field maintenance where an attached retaining clip is preferred over a separate loose locking component.
How to Select the Correct Configuration
Selection should begin with the original connection, not only the visible head shape. Confirm:
Pin diameter and effective shank length.
Round-head diameter, thickness and seating clearance.
Position, width and engagement of the attached wire retainer.
Mating-hole alignment, depth and condition.
Installation direction and access around the head and clip.
Whether the joint is fixed, pivoting or frequently disconnected.
Expected shear, bending, vibration, impact and side loading.
Exposure to soil, moisture, corrosion and abrasive material.
Wear and load requirements are determined by the complete joint. Repeated movement can wear the shaft and hole, while side loading or misalignment can bend the pin or deform the retaining clip. The 45# steel material should therefore be considered together with the pin dimensions, mating component and service conditions. No fixed load capacity or service life is claimed without a defined application and specification.
Installation, Wear and Maintenance
Before installation, isolate the equipment, support the implement safely and follow the equipment manufacturer's service procedure. Inspect the pin, round head and double-wire retainer for visible damage. Clean the mating holes and compare the replacement with the approved part or sample. Insert the pin in the specified direction without forcing it through an offset, cracked or excessively worn hole.
After insertion, confirm that the round head is seated and that the double-wire retainer is engaged in the intended position without contacting moving parts. Do not bend or reshape the retainer as a substitute for correct fitment. If the clip is loose, cracked, displaced or unable to remain in its intended position, remove the assembly from service for review.
During maintenance, check the shaft for scoring, bending, corrosion and abnormal clearance. Inspect the hole, bracket and connected parts for oval wear, cracks or misalignment. A new pin may not correct a worn connection, so the complete joint should be checked before the machine returns to operation.
Stock Supply and Compatibility Support
This round head pin with attached double-wire retainer is intended for B2B purchasing by agricultural machinery manufacturers, dealers, repair workshops and engineering contractors. Stock availability can be reviewed for the shown configuration and required quantity for equipment assembly, replacement inventory, planned maintenance and field-service work.
For fitment support, provide the equipment brand and model, pin position, original part, key dimensions, installation direction, drawing or sample and a clear photo of the mating connection. Explain whether the joint is fixed or moving and whether the retainer operates near other moving components. This information helps distinguish the product from other agricultural machinery pins and reduces the risk of an incorrect replacement.
Stock quantity and availability should be reconfirmed for each purchase. Compatibility should be approved from the actual dimensions and retaining arrangement, not from a general product category or image similarity.
Specification Review and Supply Support
The primary offering is the pictured 45# steel configuration. If a customer needs a different shaft diameter, effective length, round-head form or retaining arrangement, the requirement can be reviewed from a drawing, sample or equipment information. Any unlisted specification must be confirmed before production or supply.
OEM/ODM support may be discussed for customer-approved agricultural component specifications. This means specification and supply coordination only; it does not indicate original-brand status, authorization or certification.
Bulk Purchasing
For a quotation, send the requested quantity, application, material requirement of 45# steel and available fitment information. Manufacturers can evaluate the pin for compatible equipment programs, distributors can plan service inventory, and repair teams can source repeat replacement parts.
FAQ
It is a connecting and retaining pin for compatible tractor, implement and agricultural machinery joints, including removable attachments, linkage points and pivot-related connections.
The attached wire sections form a retaining arrangement that stays with the pin assembly. The exact locking action depends on the mating connection and must be confirmed for the intended installation.
No. Confirm the shaft diameter, effective length, round-head dimensions, clip engagement, hole alignment and installation direction with the original part, drawing or sample.
The confirmed material is 45# steel. Actual wear and load suitability depend on the joint design, dimensions, movement and operating environment.
Yes. Stock and bulk supply can be reviewed for equipment manufacturers, distributors, repair workshops and engineering contractors according to the approved configuration and quantity.
Check the shaft, round head, double-wire retainer, mating hole and connected bracket for bending, wear, corrosion, cracks, looseness or misalignment. Replace damaged retaining components before service.
Send your equipment information, drawing or sample to request stock availability, fitment support and a B2B quotation for round head pins with attached double-wire retainers.
Copyright © 2025-2026 https://www.agrimaxagriculture.com All Rights Reserved Cangzhou Agrimax Agricultural Machinery Parts Co., Ltd.
